Pmod CAN 2.0B Controller with Integrated Transceiver
€20.00
Product information "Pmod CAN 2.0B Controller with Integrated Transceiver"
The Pmod CAN is a CAN 2.0B controller with an integrated transceiver. The embedded Microchip MCP25625 chip connects directly to the physical CAN bus and meets automotive requirements for high-speed (1 Mb/s), low quiescent current, electromagnetic compatibility, and electrostatic discharge.
Features:
CAN 2.0B controller with integrated transceiver
- Suitable for automotive applications
- Up to 1 Mb/s operation
- Up to 10 MHz SPI clock speed
- Standard DB9 connector for secure connection
- Small PCB size for flexible designs 1.4" × 1.8" (3.6 cm × 4.6 cm)
- 12-pin Pmod connector with SPI interface
-
Follows the Digilent Pmod Interface Specification 1.1.0 type 2A
- Libraries and example code available in resource center
Accessory Items
MCVEVP baseboard:- 2x Gigabit Ethernet,- 2x RS232,- 2x CAN,- USB,- HSMC connector,- 3x PMOD connector Power Supply TFT/Touch (optional) System on module: MCV-2DB MCV-X2DB MCV-6DB MCV-X6DB Altera SoC FPGA 5CSEBA2U23C8N 5CSXFC2C6U23C7N 5CSEBA6U23C7N 5CSXFC6C6U23C7N Dual Cortex A9 600 MHz 800 MHz 800 MHz 800 MHz PCIe √ √ e.MMC Flash 4 GB 4 GB 4 GB 4 GB DDR3 SDRAM 1 GB 1 GB 1 GB 1 GB FPGA Logic Elements (LE) 25K 25K 110K 110K Temperature range 0°C...+70°C 0°C...+70°C 0°C...+70°C 0°C...+70°C Size 42 x74 mm 42 x74 mm 42 x74 mm 42 x74 mm Connectors 360 pins on 2xQSH connectors
M100PFEVP – PolarFire FPGA Evaluation PlatformEvaluation and Reference Platform for the M100PF SoM The M100PFEVP supports a quick start-up of FPGA projects and can easily be used as a fast-prototype platform. M100PF offers the full flexibility of the PolarFire FPGA family. PolarFire cost-optimized FPGAs deliver the lowest power at mid-range densities with 12.7 Gbps SerDes transceivers as well as best-in-class security and reliability. They offer unprecedented capabilities and value with 10G transceivers, advanced I/Os, security and DSP capabilities while maintaining all the advantages traditionally associated with non-volatile FPGAs such as static power, security and single event upset (SEU) immunity. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT Markets. Features 2x Gigabit Ethernet USB 2x UART 2x CAN TFT connector HSMC extension connector 3x PMOD extension connectors microSD-card slotPolarFire FPGAs have now been adopted by dozens of customers in key communications, defense and industrial infrastructure market segments. These systems have a substantially lower cost of ownership, as the PolarFire family enables significantly lower power consumption and an ability to operate in harsher thermal environments.
The Spiderboard Baseboard is a unique baseboard, designed to host the Spiderboard SoM / MX10 SoM based on Intel PSG (former Altera®) MAX® 10 FPGAs. Features: simple baseboard in 2 layer design compatibility to the Spiderboard SoM as well as the MX10 SoM. open hardware MxM2 pcb edge connector every pin of the MxM2 connector module is accessible at one of the pinheaders large 25x15 .1” prototyping area 4 PMOD compatible headers (3.3V or 5V supply voltage selectable) 2 user push buttons reset and power buttons 2 user LEDs Arduino shield compatible interface Intel PSG Blaster compatible programming interfaces USB mini B connector CR2032 cell holder JST-2.0 lithium battery connector configuration jumpers (e.g. boot selection for MX10 module) MX10 SoM / SpiderSoM configurations: MX10-L MX10-S8 MX10-S16 MX10-U SoM-L SoM-S FPGA 10M04DC F256 10M08DA F256 10M16DA F256 10M50DA F256 10M02SC MAX10 10M08SA MAX10 ADC - 1 1 2 - 1 Clock 25 MHz XO 25 MHz XO 25 MHz XO, PLL IDT5P49V5923 25 MHz XO, PLL IDT5P49V5923 25 MHz XO 25 MHz XO DDR3 RAM - - 128 MB 512 MB - - SPI NOR - - - 4 MB - 4MiB e.MMC NAND Flash - - 4 GB 4 GB - - RTC - - - MPC794xx - - GPIO/ LVDS TX/Rx 100/ 13/ 16 100/ 13/ 16 100/ 13/ 16 100/ 13/ 16 130/ 13/ 16 130/ 13/ 16 Li-Ion charger LTC 4155 - - LTC 4155 - - I/O Voltage programmable 1.8V/ 2.5V/ 3.0V/ 3.3V 3.3V 3.3V Temperature range 0oC ... +70oC 0oC ... +70oC 0oC ... +70oC 0oC ... +70oC 0oC ... +70oC 0oC ... +70oC Size 70mm x 35mm 70mm x 35mm 70mm x 35mm 70mm x 35mm 70mm x 35mm 70mm x 35mm
The M100PFEVPS supports a quick start-up of your SoC-FPGA project and can easily be used as a fast-prototype platform. Explore the new five core RISC-V architecture and integrate it into your product. Order Codes M100PFSEVP-250BAAB M100PFS-250BAAB MPFS250T PolarFire SoC FPGA 2GB DDR4 SDRAM dedicated to the HMS 512MB DDR4 SDRAM dedicated to the FPGA 32 MB SPI NOR Flash 4 GByte eMMC 0°C...+70°C 2x Gigabit Ethernet USB 2x UART 2x CAN TFT connector HSMC extension connector 3x PMOD extension connectors microSD-card slot Contact ARIES Embedded for Special Features and early Access
Similar Items
Features: Eight high-brightness green LEDs; Uses BJTs for low-power logic level control; Small PCB size for flexible designs 2.8 cm × 2.0 cm; 2×6-pin Pmod connector with GPIO interface. Pmod 8LD has eight high-brightness LEDs that are driven by logic level transistors so that each LED can be individually illuminated from a logic high signal. Custom antistatic Pmod packaging is included.
Features: 4 slide switches; Add user input to host board or project; Static binary logic input; Small PCB size for flexible designs 3.3 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod SWT provides users with four slides switches for up to 16 different binary logic inputs to for the attached system board. Custom antistatic Pmod packaging is included.
Features: USB to serial UART interface; Micro USB connector; Option to power the system board through the FTDI chip; Small PCB size for flexible designs 2.5 cm × 2.0 cm; 6-pin Pmod connector with UART interface. Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Custom antistatic Pmod packaging is included.
Features: High-speed RS-485 communication module; Isolated RS-485/RS-422 interfaces for use in noisy environments; 16Mbps maximum data rate; Connect up to 256 nodes on one bus; Differential half or full-duplex communication; Thermal shutdown and ±15kV ESD protection; 6-pin Pmod connector with UART interface. Pmod RS485 is a high-speed communication module powered by the Analog Devices ADM582E. By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. Custom antistatic Pmod packaging is included.
Features: Real-time clock/calendar with lithium coin cell back-up; Multi-function pin output that can generate a square wave; Two available alarms; 128 bytes EEPROM; 64 bytes SRAM; Small PCB size for flexible designs 3.3 cm × 2.0 cm; 2×4-pin connector with I2C interface. Pmod RTCC is a real-time clock/calendar powered by the Microchip MCP79410. Through the I2C interface, users may configure up to two alarms that can be triggered at a wide variety of possible times. Custom antistatic Pmod packaging is included.
The Pcam 5C is an imaging module meant for use with FPGA development boards. The module is designed around the Omnivision OV5640 5 megapixel (MP) color image sensor. This sensor includes various internal processing functions that can improve image quality, including automatic white balance, automatic black level calibration, and controls for adjusting saturation, hue, gamma and sharpness. Data is transferred over a dual-lane MIPI CSI-2 interface, which provides enough data bandwidth to support common video streaming formats such as 1080p (at 30 frames per second) and 720p (at 60 frames per second). The module is connected to the FPGA development board via a 15-pin flat-flexible cable (FFC) that is pin compatible with the connector found on the popular Raspberry Pi development board. The Pcam 5C comes with a 10 cm flat-flexible cable and a factory-installed fixed focus lens with M12 lens mount, so it is ready to use out of the box. Features: 5MP color system-on-chip image sensor 15-pin FFC connector for image data Dual lane MIPI CSI-2 image sensor interface Supports QSXGA@15Hz, 1080p@30Hz, 720p@60Hz, VGA@90Hz and QVGA@120Hz Output formats include RAW10, RGB565, CCIR656, YUV422/420, YCbCr422, and JPEG compression* Standard M12 lens mount for lens interchangeability Ships with 10 cm cable and factory installed fixed-focus lens Small PCB size for flexible designs (4.0 cm x 2.5 cm) 1×7 straight 100-mil header for access to auxiliary camera signals Works with Pcam compatible Digilent development boards *JPEG compressed output is a feature of the OV5640, but is currently untested on this module
Features: Four momentary pushbuttons; Debouncing filters; Inverting Schmitt Triggers; Small PCB size for flexible designs 3.0 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board. Custom antistatic Pmod packaging is included.
Features: Rotary push-button shaft encoder; Add multiple types of user input to host board or project; Additional static slide switch; Small PCB size for flexible designs 3.8 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs such as a way for users to quickly switch between multiple choices shown on a screen or predefined motor speeds. The module also includes a sliding switch that is commonly used as an on/off output. An encoder is commonly used in freely rotating volume knobs to detect how many "clicks" a knob has been rotated. Custom antistatic Pmod packaging is included.
Features: Maxim Integrated MAX3232 RS232 transceiver; Standard RS232 DB9 connector; Optional RTS and CTS handshaking functions; Small PCB size for flexible designs 2.5 cm × 3.3 cm; 6-pin Pmod connector with UART interface. Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver. The RS232 module is configured as a data communications equipment (DCE) device. It connects to data terminal equipment (DTE) devices, such as the serial port on a PC, using a straight-through cable. Custom antistatic Pmod packaging is included.
Features: Ultra-sensitive GPS module (-165 dBm); Add 3m 2D satellite positioning accuracy to any embedded system; Low power consumption; Up to 10Hz update rate; NMEA (default) and RTCM protocols available; Small PCB size for flexible designs 5.0 cm × 2.0 cm; 6-pin Pmod connector with UART interface. Pmod GPS can provide satellite positioning accuracy to any embedded system. By communicating through UART with the GlobalTop FGPMMOPA6H GPS module, users may benefit from the 3 meter accuracy for any long term traveling. Custom antistatic Pmod packaging is included.
The Digilent Pmod COLOR is a color sensor module with the ability to sense red, green, blue and clear light. The onboard AMS's TCS3472 integrates an IR blocking filter to accurately determine the color of objects as well as sense ambient light under varying lighting conditions and through attenuating materials. Features: IR-blocking filter White LED for reflective measurements Suitable for use behind darkened glass Small PCB size for flexible designs 0.8“ × 1.35” (2.03 cm × 3.43 cm) 6-pin Pmod connector with I²C interface Pass-through Pmod host port for daisy chaining Follows Digilent Pmod Interface Specification Type 6 Library and example code available on the Resource Center