MCVEVP

€695.00*

Prices excl. VAT plus shipping costs

System on Module

MCV-2DB

MCV-6DB

MCV-X2DB

MCV-X6DB

TFT

MxxDK

without TFT

Product number: MCVEVP

Product information "MCVEVP"

MCVEVP baseboard:
- 2x Gigabit Ethernet,
- 2x RS232,
- 2x CAN,
- USB,
- HSMC connector,
- 3x PMOD connector

Power Supply
TFT/Touch (optional)

System on module:

	MCV-2DB	MCV-X2DB	MCV-6DB	MCV-X6DB
Altera SoC FPGA	5CSEBA2U23C8N	5CSXFC2C6U23C7N	5CSEBA6U23C7N	5CSXFC6C6U23C7N
Dual Cortex A9	600 MHz	800 MHz	800 MHz	800 MHz
PCIe		√		√
e.MMC Flash	4 GB	4 GB	4 GB	4 GB
DDR3 SDRAM	1 GB	1 GB	1 GB	1 GB
FPGA Logic Elements (LE)	25K	25K	110K	110K
Temperature range	0°C...+70°C	0°C...+70°C	0°C...+70°C	0°C...+70°C
Size	42 x74 mm	42 x74 mm	42 x74 mm	42 x74 mm
Connectors	360 pins on 2xQSH connectors

Accessory Items

MxxDK

17,7cm (7'') TFT display resistive touchscreen 800x480 pixel resolution 400 cd/m² LED backlight

€110.00*

MxxPsp

Wall Plug 9V, 12W

€9.30*

Pmod 8LD

Features: Eight high-brightness green LEDs; Uses BJTs for low-power logic level control; Small PCB size for flexible designs 2.8 cm × 2.0 cm; 2×6-pin Pmod connector with GPIO interface. Pmod 8LD has eight high-brightness LEDs that are driven by logic level transistors so that each LED can be individually illuminated from a logic high signal. Custom antistatic Pmod packaging is included.

€8.70*

Pmod SWT

Features: 4 slide switches; Add user input to host board or project; Static binary logic input; Small PCB size for flexible designs 3.3 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod SWT provides users with four slides switches for up to 16 different binary logic inputs to for the attached system board. Custom antistatic Pmod packaging is included.

€6.00*

Pmod USBUART

Features: USB to serial UART interface; Micro USB connector; Option to power the system board through the FTDI chip; Small PCB size for flexible designs 2.5 cm × 2.0 cm; 6-pin Pmod connector with UART interface. Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Custom antistatic Pmod packaging is included.

€18.00*

Pmod RS485

Features: High-speed RS-485 communication module; Isolated RS-485/RS-422 interfaces for use in noisy environments; 16Mbps maximum data rate; Connect up to 256 nodes on one bus; Differential half or full-duplex communication; Thermal shutdown and ±15kV ESD protection; 6-pin Pmod connector with UART interface. Pmod RS485 is a high-speed communication module powered by the Analog Devices ADM582E. By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. Custom antistatic Pmod packaging is included.

€40.00*

Pmod RTCC

Features: Real-time clock/calendar with lithium coin cell back-up; Multi-function pin output that can generate a square wave; Two available alarms; 128 bytes EEPROM; 64 bytes SRAM; Small PCB size for flexible designs 3.3 cm × 2.0 cm; 2×4-pin connector with I2C interface. Pmod RTCC is a real-time clock/calendar powered by the Microchip MCP79410. Through the I2C interface, users may configure up to two alarms that can be triggered at a wide variety of possible times. Custom antistatic Pmod packaging is included.

€16.00*

USB to Serial Converter

€15.00*

QTH-090-01-F-D-A

Connector Receptacle 180 pins center strip contacts surface mount Gold

€10.50*

Pmod BTN

Features: Four momentary pushbuttons; Debouncing filters; Inverting Schmitt Triggers; Small PCB size for flexible designs 3.0 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board. Custom antistatic Pmod packaging is included.

€7.00*

Pmod ENC

Features: Rotary push-button shaft encoder; Add multiple types of user input to host board or project; Additional static slide switch; Small PCB size for flexible designs 3.8 cm × 2.0 cm; 6-pin Pmod connector with GPIO interface. Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs such as a way for users to quickly switch between multiple choices shown on a screen or predefined motor speeds. The module also includes a sliding switch that is commonly used as an on/off output. An encoder is commonly used in freely rotating volume knobs to detect how many "clicks" a knob has been rotated. Custom antistatic Pmod packaging is included.

€8.00*

Pmod RS232

Features: Maxim Integrated MAX3232 RS232 transceiver; Standard RS232 DB9 connector; Optional RTS and CTS handshaking functions; Small PCB size for flexible designs 2.5 cm × 3.3 cm; 6-pin Pmod connector with UART interface. Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver. The RS232 module is configured as a data communications equipment (DCE) device. It connects to data terminal equipment (DTE) devices, such as the serial port on a PC, using a straight-through cable. Custom antistatic Pmod packaging is included.

€13.10*

Pmod GPS

Features: Ultra-sensitive GPS module (-165 dBm); Add 3m 2D satellite positioning accuracy to any embedded system; Low power consumption; Up to 10Hz update rate; NMEA (default) and RTCM protocols available; Small PCB size for flexible designs 5.0 cm × 2.0 cm; 6-pin Pmod connector with UART interface. Pmod GPS can provide satellite positioning accuracy to any embedded system. By communicating through UART with the GlobalTop FGPMMOPA6H GPS module, users may benefit from the 3 meter accuracy for any long term traveling. Custom antistatic Pmod packaging is included.

€34.80*