Florida PLUS
Product information "Florida PLUS"
The Florida Plus carrier board is intended as a generic development board for the Miami MPSOC Plus System-on-Modules (SOM) for general purpose applications as well as for the evaluation of the performance of the Miami MPSOC Plus SOM.
- 2x Samtec QTH-060-01-L-D-A board-to-board interconnect + 1x Samtec QTH-090-01-L-D-A
- Dyplo supported plattform
- 1x LAN (1000M/100M/10M)
- WiFi via MIO with SDIO
- 1x UART via USB or Virtual COM
- PCI-express
- 2x Sata-3
- 2x CAN via PMOD
- I2C via PMOD
- SPI via PMOD
- 2x USB-C
- 1x SD-Card/ SDIO
- 2x 100% LPC FMC
- 2x PMOD
- Audio via PMOD
- Video via FMC or PMOD
- 1x JTAG
- single 12Vdc 5A supply
- 0°C...+70°C
Similar Items
Miami MPSoC Plus ZU9
€2,292.00*
The Miami MPSoC Plus System on Module (SoM) is an embedded computer board, integrating all key functionalities to deliver a complete computing system, running e.g. Linux or FreeRTOS. The modules are based on Xilinx System on Chip 16nm technology, using Zynq Ultrascale+ ZU6/ZU9/ZU15.The module combines a high performance and high-density programmable logic with dedicated hardener IP blocks, such as DSP cores, memory controllers and PCIe endpoints.
600KLE, 2520 DSP Blöcke, 32.1Mb RAM, 548K FlipFlops, 274K LUTs CLB2x6Gbit/s PS tranceivers, 16x12.5Gbit/s GTH tranceivers
Processor System
ARM Cortex-A53 MPCore Quad-core CPU Architecture up to 1.2GHz CPU Perfomance
ARM Cortex-R5 (dual core) Real Time Processor
ARM Mali -400 MP2 Graphics Processor
2/4/8 GByte DDR4 with/without ECC 32/64/72bits
0/8/16/32/64 GB pseudo-SLC or MLC eMMC
64/128/256 MB Quad SPI
32 Kbit I2C EEPROM storage
Processor-Peripherals
UART
CAN
I2C
SPI
FPD link
SDI
TFT
HDMI
DisplayPort
2xUSB 3.0 incl on-board ULPI media
Debug UART
Concole
PS JTAG
Ethernet
rich I/O
Clock distribution
single 9-16 Vdc supply
size 95mmx68,5mm
2 x 120 pins + 1x180 pins Samtec mezzanine board-to-board interconnect
Florida GEN
€3,995.00*
The FLORIDA-GEN can be used as a generic carrier for general purpose applications and is primarily intended as evaluation and prototyping platform for the Miami Zynq and Miami MPSOC System-on-Modules (SOM).
2x Samtec QTH-060-01-L-D-A board-to-board interconnect
Dyplo supported plattform
1x LAN (1000M/100M/10M)
WiFi via USB or PMOD
4x UART via USB including primary console
2x Sata-3
I2C via PMOD
SPI via PMOD
1x USB 2.0 OTG
1x SD-Card/ SDIO
4x PMOD
Audio via HDMI or USB
HDMI 1.4 IO
1x JTAG
5x LES, 2X Input switches, 4x PMOD incl ADC GPIO
single 12V or 15Vdc supply
0°C...+70°C
Variants from €3,635.00*