M100PF - SoM featuring Microsemi PolarFire FPGALow Power Mid-Range FPGA for Industrial Application The M100PF SoM family spans from 100K logic elements (LEs) to 300K LEs, features 12.7G transceivers and offers up to 50% lower power than competing mid-range FPGAs. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT markets.PolarFire FPGAs offer various device features such as design security, low power devices and data security. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers. The M100PF combines most FPGA features on a 74mmx42mm footprint, the board-to-board interconnect is implemented by using two high-quality connectors which expose 360pins. The SoM is available in both the commercial temperature range 0°C...+70°C as well as in the industrial temperature range -40°C....+85°C. Features: PolarFire FPGA MPF100T109KLE, 336 Math Blocks (18x18MACC) 256 MiB configuration device1GB DDR3 SDRAM 4 GiB eMMC memory 8 SERDES Lanes, 250Mbps to 12.5Gbps 2 PCIe Gen2 End Points/Root Ports rich user I/O Clock distribution single 3,3V supply size 74mmx42mm 2 x Samtec QSH-090-01-F-D-A board-to-board interconnect 0°C...+70°C   RISC-V Softcores M100PF is supported by  a comprehensive suite of software tool chains and IP cores for your FPGA designs. The Libero SoC and SoftConsole development environments together provide all the required tools to port RISC-V Soft CPUs on Microsemi's FPGA portfolio and develop, test and debug embedded firmware. Your RISC-V FPGA projects starts in a few minutes M100PF- versatile usability at its best M100PF is of course one of the most flexible System on Module in the embedded market. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers High Flexibility Maximum flexibility for using the SoM  with 'exotic' interface requirements. Combining standard IP cores like i.e. display-controller, Ethernet, CAN, serial, I²C, SPI, etc, unique SoM configurations can be used. Benefit from the variety of freely available IP-cores, or, create your own. Robust and Reliable High-quality connector suitable for high frequency signals and applications in harsh environments. Use a well designed System on Module with sufficient ressources in terms of performance, interfaces and memory

M100PF - SoM featuring Microsemi PolarFire FPGALow Power Mid-Range FPGA for Industrial Application The M100PF SoM family spans from 100K logic elements (LEs) to 300K LEs, features 12.7G transceivers and offers up to 50% lower power than competing mid-range FPGAs. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT markets.PolarFire FPGAs offer various device features such as design security, low power devices and data security. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers. The M100PF combines most FPGA features on a 74mmx42mm footprint, the board-to-board interconnect is implemented by using two high-quality connectors which expose 360pins. The SoM is available in both the commercial temperature range 0°C...+70°C as well as in the industrial temperature range -40°C....+85°C. Features: PolarFire FPGA  MPF200T192KLE, 588 Math Blocks (18x18MACC) 256 MiB configuration device 1GB DDR3 SDRAM 4 GiB eMMC memory 8 SERDES Lanes, 250Mbps to 12.5Gbps 2 PCIe Gen2 End Points/Root Ports rich user I/O Clock distribution single 3,3V supply size 74mmx42mm 2 x Samtec QSH-090-01-F-D-A board-to-board interconnect 0°C...+70°C   RISC-V Softcores M100PF is supported by  a comprehensive suite of software tool chains and IP cores for your FPGA designs. The Libero SoC and SoftConsole development environments together provide all the required tools to port RISC-V Soft CPUs on Microsemi's FPGA portfolio and develop, test and debug embedded firmware. Your RISC-V FPGA projects starts in a few minutes M100PF- versatile usability at its best M100PF is of course one of the most flexible System on Module in the embedded market. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers High Flexibility Maximum flexibility for using the SoM  with 'exotic' interface requirements. Combining standard IP cores like i.e. display-controller, Ethernet, CAN, serial, I²C, SPI, etc, unique SoM configurations can be used. Benefit from the variety of freely available IP-cores, or, create your own. Robust and Reliable High-quality connector suitable for high frequency signals and applications in harsh environments. Use a well designed System on Module with sufficient ressources in terms of performance, interfaces and memory

M100PF - SoM featuring Microsemi PolarFire FPGALow Power Mid-Range FPGA for Industrial Application The M100PF SoM family spans from 100K logic elements (LEs) to 300K LEs, features 12.7G transceivers and offers up to 50% lower power than competing mid-range FPGAs. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT markets.PolarFire FPGAs offer various device features such as design security, low power devices and data security. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers. The M100PF combines most FPGA features on a 74mmx42mm footprint, the board-to-board interconnect is implemented by using two high-quality connectors which expose 360pins. The SoM is available in both the commercial temperature range 0°C...+70°C as well as in the industrial temperature range -40°C....+85°C. Features: PolarFire FPGA MPF300T300KLE, 924 Math Blocks (18x18MACC) 256 MiB configuration device 1GB DDR3 SDRAM 4 GiB eMMC memory 8 SERDES Lanes, 250Mbps to 12.5Gbps 2 PCIe Gen2 End Points/Root Ports rich user I/O Clock distribution single 3,3V supply size 74mmx42mm 2 x Samtec QSH-090-01-F-D-A board-to-board interconnect 0°C...+70°C   RISC-V Softcores M100PF is supported by  a comprehensive suite of software tool chains and IP cores for your FPGA designs. The Libero SoC and SoftConsole development environments together provide all the required tools to port RISC-V Soft CPUs on Microsemi's FPGA portfolio and develop, test and debug embedded firmware. Your RISC-V FPGA projects starts in a few minutes M100PF- versatile usability at its best M100PF is of course one of the most flexible System on Module in the embedded market. All PolarFire FPGAs are integrated with multi-protocol industry-leading low-power transceivers High Flexibility Maximum flexibility for using the SoM  with 'exotic' interface requirements. Combining standard IP cores like i.e. display-controller, Ethernet, CAN, serial, I²C, SPI, etc, unique SoM configurations can be used. Benefit from the variety of freely available IP-cores, or, create your own. Robust and Reliable High-quality connector suitable for high frequency signals and applications in harsh environments. Use a well designed System on Module with sufficient ressources in terms of performance, interfaces and memory

The M100PFS is based on the PolarFire SoC FPGA architecture by Microchip and combines high-performance 64-bit RISC-V cores with outstanding FPGA technology. The platform integrates a hardened real-time, Linux capable, RISC-V-based MPU subsystem on the mid-range PolarFire FPGA family, bringing low power consumption, thermal efficiency and defence grade security to embedded systems. The RISC-V CPU micro-architecture implementation is a simple 5 stage, single issue, in-order pipeline that doesn’t suffer from the Meltdown and Spectre exploits found in common out-of-order machines. All five CPU cores are coherent with the memory subsystem allowing a versatile mix of deterministic real time systems and Linux in a single multi-core CPU cluster. Order Code M100PFS-250BAAB-1 MPFS250T PolarFire SoC FPGA 254 KLEs 784 Math Blocks (18x18 MACC) 16x 12.5 Gbps SERDES lanes 2x PCIe Gen2 end points/root points Total User I/O: MSS-IO / HSIO / GPIO / XCVRs: 136 / 60 / 48 / 4 2GB DDR4 SDRAM dedicated to the HMS 512 MB DDR4 SDRAM dedicated to the FPGA 32 MB SPI NOR Flash 4 GB eMMC size 74mm x 42mm 2 x Samtec QSH-090-01-F-D-A board-to-board interconnect 0°C...+70°C  Contact ARIES Embedded for Special Features